How to distinguish standard, medium and short head cone crushers?

Although the standard, medium and short head cone crushers are three different cone crushers, they are essentially a type of traditional spring cone crushers. The difference between the three is that the parallel belt is crushed, and the short head is parallel. The belt is longer, the medium type is second, and the standard type is shorter, as shown in the figure below:
 
 
Short head cone crusher




Medium Cone Crusher


 

Standard cone crusher

 
 
 
 
What are the specific differences between them?
 
1. Different shapes of crushing cavity
 
 
The parallel belt of the short head type cone crusher is longer, followed by the medium type, and the standard type is shorter.
 
2. Different granularity of crushed products
 
The short-head cone crusher with a relatively long parallel belt produces finer materials. Generally, this type of cone crusher is used after medium crushing; while the standard cone crusher has a coarser grain size and yields High, the crushed materials can be used as medium crushing.
 
3. The width of the discharge opening is different
 
Compared with the medium and short head cone crushers, the standard cone crusher has a wider application range of discharge opening, so the standard cone crusher has a larger processing capacity per unit time.
 
The parallel belt of the short head type is longer, and the ore outlet and discharge outlet are relatively small, and a finer product particle size can be obtained. Generally, the short head type with longer parallel belt is used as the fine crush and placed after the middle crush. The standard type, due to the shorter parallel belt, makes the crushed product thicker and has a higher output. Generally, it is used for intermediate crushing after coarse crushing, that is, after the jaw crusher or the gyratory crusher. In a nutshell, the feed openings of standard, medium, and short-head types gradually decrease, while the crushing cavity and parallel area become longer.
Pre:How to configure the sand production line more efficiently? Next:Do you know the fixed umbrella plate of the cone crusher?