Stone sand production line

Production line introduction
The stone production line has a high degree of automation, and the entire production line requires almost no manual operation except for the startup and shutdown of the equipment and daily maintenance. It has high production efficiency, low operating cost, large output and high profit. The finished stone has uniform particle size and good shape, which meets the national high-speed material requirements.
Production line advantage
1. The entire production line has flexible mobility, reduced material transportation costs, low supporting power, low power consumption, strong adaptability, flexible configuration, and a very long operating cycle.
2. The whole production line is 20% higher than the traditional construction waste treatment, and it is also a perfect equipment that can turn construction waste into treasure.
3. The entire production line can be combined with different types of equipment according to different process requirements to meet the different process requirements of customers.
4. The total energy consumption of stone sand making production is reduced by 30-40%, and the consumption of wear-resistant parts is reduced by 70-80%, so as to reduce the total investment by 20-30%.
Production line process
The ore is evenly sent to the jaw crusher by the vibrating feeder for coarse crushing, the coarsely crushed material is sent to the sand making machine by the belt conveyor for further crushing, and the finely crushed material is transported to the vibrating screen for screening. The material that meets the required particle size of the finished product is sent to the sand washing machine for cleaning. After cleaning, the finished product is output by the conveyor belt to be the finished product; the material that does not meet the required particle size of the finished product is returned to the sand making machine from the vibrating screen for reprocessing, forming a closed circuit for multiple cycles. The granularity of the finished product can be combined and classified according to the needs of users.
Pre:What is the output of DMC1950 cone crusher in one hour? Next:Maintenance experience of equipment of 200 tons per hour granite crushing production line